PVC Card Cutter (Aadhaar/ID)
100% in your browser — the PDF and password never leave this device. Crop once, save as template, batch many customers, print with 6 ready layouts.
Manual Mode: drag on the page below to select the Front box, then the Back box.
Load a PDF or image to begin.
Preview
Batch (0 cards)
Ratings and comments
No ratings yet. Be the first to rate this tool.
What is the PVC card cutter sheet maker?
PVC cards for IDs and loyalty cards are printed at the standard CR80 size of 85.6 x 54 mm. This tool places the image of a card on a print sheet at exactly that size, with the front and back lined up so that a print shop can print on both sides and cut the cards.
How to make a card print sheet
- Upload the front image of the card.
- Add the back image if the card has one.
- Choose portrait or landscape orientation.
- Download the sheet and print it at 100 percent scale.
- Cut along the marks or take the sheet to a card-cutting shop.
Card size
| Item | Value |
|---|---|
| Standard card (CR80) | 85.6 x 54 mm |
| Orientation | Landscape or portrait |
| Print scale | 100 percent |
Tips for a good print
- Use a high resolution image to avoid a blurry card.
- Make sure the front and back are the same orientation.
- Print a test page on plain paper to check the size with a ruler.
- Use thick paper or a PVC sheet suitable for your printer.
- Check that the front and back line up when you flip the page.
Use only for your own documents
This tool only lays out a picture on a sheet. It does not create or verify any official document. Use it for your own cards, membership cards, staff badges and similar items. Follow the rules for each ID, and do not copy official ID documents that you are not allowed to reproduce.
A worked example
A small club wants membership cards for its members. A designer makes the card artwork in a design app, and the club uploads the front and back images here. The tool places them at the CR80 size on a sheet. A print shop prints on both sides of PVC sheets and cuts the cards. The club checks that the size matches a ruler before it prints the full batch.
Common problems and fixes
| Problem | Fix |
|---|---|
| Card prints too small or large | Print at 100 percent |
| Back is upside down | Check the orientation of both images |
| Front and back do not line up | Print on both sides as "flip on long edge" or "flip on short edge" as your printer needs |
| Image is blurry | Use a higher resolution image |
Related tools
- PVC Card Print Sheet – Other layouts for card printing
- WhatsApp Photo Print – Print photos on sheets
- Image Cropper – Crop a card photo
- ID Card Crop – Crop a card from a photo
Frequently asked questions
What is the card size?
The standard CR80 size, 85.6 x 54 mm.
Can I add a back side?
Yes. It goes to the second page and lines up with the front.
Is this a valid ID?
No. It only arranges a picture for printing.
Which scale should I print?
100 percent. Do not use fit to page.
Which paper should I use?
Use thick paper or a PVC sheet that your printer supports.
Is it free?
Yes.