TNEB Bill Calculator (Units to Amount, 200 Free Units)
Enter the units for your two-month bill, or the old and new meter readings. The tool applies the free units and the slab rates and shows the amount. All rates are editable, so you can match your own bill.
| From unit | To unit | Rate ₹ |
|---|
| Appliance | Watts | Qty | Hours/day |
|---|
How a Tamil Nadu domestic electricity bill is worked out
Homes in Tamil Nadu get a bill every two months. The bill depends on the number of units used in those two months. The rate per unit goes up as the use goes up, which is called a telescopic tariff: each rate applies only to the units that fall in its slab.
The government also gives free units to domestic consumers. The published rule is that the first 200 units of a two-month bill are free if the total use is up to 500 units, and the free units fall to 100 if the total goes above 500. Because of this, the 500 unit mark is the costliest line for a household. This calculator shows that jump for you.
Slab rates used by default
| Units in a 2-month bill | Rate per unit |
|---|---|
| 1 to 400 (after the free units) | ₹4.70 |
| 401 to 500 | ₹6.30 |
| 501 to 600 | ₹8.40 |
| 601 to 800 | ₹9.45 |
| 801 to 1,000 | ₹10.50 |
| Above 1,000 | ₹11.55 |
Warning: Undefined array key "h" in /home/u564043957/domains/tools.sarnithmedia.in/public_html/tools/_simple-tool.php on line 31
Rates and the free-unit rule are revised from time to time by the regulator and the government. Fixed charges and other items may also appear on a bill. For this reason every number in the tool is editable. Compare the result with your last bill and change the table if needed.
Worked example
At 500 units, the first 200 are free. The next 200 units cost 200 × ₹4.70 = ₹940, and the next 100 units cost 100 × ₹6.30 = ₹630. The energy charge is ₹1,570. At 600 units the free units drop to 100, so the charge becomes 300 × ₹4.70 + 100 × ₹6.30 + 100 × ₹8.40 = ₹2,880.
How to use this calculator
- Enter the units on your bill, or the previous and present meter readings.
- Check the slab table, the free-unit rule and any fixed charge against your own bill.
- Read the energy charge, the total and the warning about the 500 unit line.
- Use the appliance estimator to see which appliances use the most units. Press Use these units to try the result.
- Copy or share the estimate.
Ways to lower the bill
- Stay below the 500 unit mark in every two-month bill if you can.
- Use a 5-star inverter AC with a set temperature of 24 to 26 degrees.
- Switch to LED lights and BLDC fans.
- Run the water heater and the pump only as long as needed.
- Unplug devices that stay on standby.
Frequently asked questions
All processing happens in your browser. Your files and data are not uploaded to our server.
Ratings and comments
No ratings yet. Be the first to rate this tool.